Office Address

Frankfurt (Oder), Germany

Phone Number

+49 15510 479175

Email Address

info@cmcsmartfarm.com

Auto Steer System Co...

Auto Steer System Components Explained

Auto Steer System Components Explained

An autosteer system looks complex, but it's really just a few parts working together to steer your tractor along GPS lines. Knowing what each one does makes it far easier to choose a kit and understand what you're paying for. Here are the main auto steer system components explained in plain terms.

1. The GNSS antenna and receiver

This is the part that works out where the tractor is. It picks up signals from GPS and other satellite systems (together called GNSS) and calculates the machine's position many times a second. It usually sits on the cab roof with a clear view of the sky. On its own it gives rough accuracy; the correction source below is what makes it precise.

2. The correction source (RTK, PPP or SBAS)

Raw satellite position drifts by up to a few metres, so autosteer adds a correction signal. RTK brings it down to around 2.5 cm, pass after pass, using either your own RTK base station or a network (NTRIP) subscription. Free corrections like SBAS and PPP give lower accuracy at no cost. The correction level you choose is the single biggest driver of both accuracy and price.

3. The display (terminal)

The screen in the cab is where you set up fields, draw A/B guidance lines, start and stop autosteer and watch your coverage. On ISOBUS machines the same display can also control implements, so you're not adding a second screen.

4. The steering unit (the actuator)

This is what actually turns the wheels, and it comes in three forms depending on your tractor:

  • Electric steering wheel — a motor turns your existing wheel. Easiest to fit and to move between tractors.
  • Steer-ready (CAN) — talks to a factory-guidance-ready tractor's own steering.
  • Hydraulic — ties into the tractor's hydraulic steering for the most direct control on big machines.

5. Optional add-ons

Depending on the job, you might add accessories such as an ISOBUS module for implement control, section and rate control for sprayers, a remote switch or a camera.

How they work together

The antenna finds the position, the correction source sharpens it to centimetres, the display holds your guidance lines, and the steering unit keeps the tractor on them, correcting many times a second. Get those four right for your tractor and the system drives straighter and more accurately than any operator can by hand.

Not sure which parts suit your machine? Our how to choose an autosteer system guide and Autosteer Systems range walk through complete FJD kits, priced in euros and shipped worldwide from Germany.

whatsapp whatsapp